Professional Production Aluminum Machine

Current Location:Home -> Products -> Cutting Machine
Aluminum Formwork Any angle single head saw CNC LJJM-CNC-500
  • Machine Description
  • Inquiry

l Equipment Features

1.        This machine is used for cutting aluminum formwork at any angle of 25°~155°. It can cut the support heads, corner panels and other template profiles, and it can also cut special-shaped plates.

2.        The motor power and the optional blade diameter are large, which is suitable for cutting of profile with large sections.

3.        With a linear guide on the feeding system of the machine head, it ensures that the machine runs smoothly and has high accuracy.

4.        The saw-blade’s feeding system uses gas-liquid damping method, which ensures cutting stable and good cutting effect.

5.        The feeding system uses the high precision reducer gear rack driven by the servo motor of Schneider, it ensures high positioning accuracy.

6.        With micro lubrication on the moving parts, it reduces the guide wear and extends its service life;

7.        Rotary and feeding mechanism with fully closed loop configuration, it ensures high positioning accuracy.

8.        With follow-up micro-cooling device, it ensures the cutting better;

9.        The saw blade with high power spindle motor, it ensures the cutting accuracy.

10.    With high power vacuum cleaner, it keeps the working area clean and tidy.

11.    The pneumatic control components of SMC has low power consumption and no interference to the system;

12.     The rollers of profile-supporting adopt polyurethane rubber covered roller, so as to avoid the scratch of the profile.

l Main specification and technical parameter

Power supply380V  50Hz

Operation air pressure0.6~0.8 MPa

Cutting motor power / rotational speed5.8kW  2800r/min

Blade specification:φ500×φ30×4.4×Z120

Cutting angle25°~155°

Worktable angle speed2 r/min

Cutting scalewidth×height):

Bladeφ50090°:400 mm×140mm530 mm×65 mm

           45°:280 mm×140mm360 mm×65 mm

Bladeφ55090°:400 mm×170mm555 mm×65 mm

           45°:280 mm×170mm385 mm×65 mm

Bladeφ60090°:400 mm×190mm600 mm×65 mm

           45°:280 mm×190mm410 mm×65 mm

Bladeφ65090°:400 mm×220mm620 mm×65 mm

           45°:280 mm×220mm425 mm×65 mm

Auto-feeding length6500 mm

Auto-feeding speed60m/min

Cutting angle tolerance:±5

Cutting profile surface roughnessRa12.5μm

Cutting length tolerance:±0.15mm



Message Subject:
E-mail address:
Enter your Message:
Enter the code shown:



  • R&d center
  • Quality assurance
  • Achievements in scientific research
  • Partners